Specifications on the BATTMAN B6-80W Charger/Discharger:
●NiCd/NiMH Voltage level: 1.2V/cell
●Allowable fast charge current: 1C-2C (depends on the performance of cell)
●Discharge voltage cut off level: 0.85V/cell (NiCd), 1.0V/cell(NiMH)
●Operating voltage range: DC 11~18 Volts
●Max. Charge power: 80Watts
●Max. Discharge power: 10Watts
●Charge current range: 0.1~5.0A
●Discharge current range: 0.1~2.0A
●Current drain for balancing Li-Po/Ion/Fe: 300mA/cell
●Li-ion/Fe/Polymer cell count: 1~6cells
●NiCd/NiMH battery cell count: 1~15cells
●Pb battery voltage: 2V~20V(1~10cells)
●Temperature sensor port: Yes
●Built-in balance: Yes
●Net Weight: 312g(approx.)
●Dimension: 138.8 x93.9x 34.5mm(L W H)
This charger has a JST-XH charge plug, which makes it compatible with BUFFALO, BATTMAN, EXCELL and any pack with a JST XH adapter.
Features:
●High performance microprocessor
●Internal independent lithium balancer
●Adaptable to various types of lithium battery
●Maxiumum safety
●Processing time limit
●Data store/load
●Optimized operating software
●Balancing individual cells battery discharging
●Fast and storage mode of lithium battery
●Temperature threshold(optional)
●Input power monitoring
●Cyclic charging/discharging
●Li-ion, LiPo,Ni-Cd,NiMH and LiFePo capable
Warranty:
All BATTMAN chargers are covered by a 1-Year manufacturer warranty against defects in materials and workmanship. During the warranty period BATTMAN will repair our products that is found to be defective, providing that it has no signs of damage or abuse. The user will be responsible for shipping charges back to OKHOBBY.HK, and we will pay the return shipping charges.
Include:
●BATTMAN B6-80W Charger
●DC Clamp Cable
●Igniter Plug Cable
●JST Plug Cable
●Aligator clips Plug Cable
●Futaba Plug Cable
●Extension Cable